Table of Contents
Advertisement
LED screen
RED LED flashes and LED 2
flashes green when the bat-
tery pack is installed.
Motor specifications
Motor type
Motor voltage
Continuous motor power
Peak motor power
Battery pack and battery charger specifications
Default battery pack type
Default battery charger type
Noise and vibration data
Equivalent vibration level at handles equipped with blower tubes (original). See
Note 1.
Sound power level, guaranteed (LWA). See Note 2.
Sound power level, measured. See Note 2.
Equivalent sound pressure level at the operators' ear measured according to ISO
22868 equipped with blower tubes (original)
Impeller fan performance
Max. air velocity
Max. air volume
Product dimensions
Weight (without battery pack, with tubes)
Note 1: Reported data for equivalent vibration level has
a typical statistical dispersion (standard deviation) of 1.5
2
m/s
.
Note 2: Noise emissions in the environment measured
as sound power (LWA) in conformity with EC directive
449 - 003 - 20.11.2017
Possible faults
Internal battery tempera-
ture is too low or too
high
TECHNICAL DATA
Possible steps
The internal temperature in the battery must be between
-15°C (5°F) and 70°C (158°F). The environment tempera-
ture in the battery pack is too low or too high.
•
If the battery pack is too cold from the ambient envi-
ronment, move the battery pack and battery charger to
a warm environment.
•
If the battery pack is too hot, especially after operation,
move the battery pack and battery charger away from
the hot environment.
2000/14/ EC. Reported sound power level for the
machine has been measured with the original cutting
attachment that gives the highest level. The difference
between guaranteed and measured sound power is that
the guaranteed sound power also includes dispersion in
unit
Li 58GBP
(BBP58VPR)
Brushless
V (DC)
58
W
1200
W
1500
Li 585.2A
Li 58V 2.5CGR
2.851
2
m/s
dB(A)
103
dB(A)
102
dB(A)
90
m/s (mph)
67 (150)
3
m
/min (cfm)
19 (675)
kg (lb)
6.15 (13.6)
13
Advertisement
Table of Contents
