netsys NV-720R User Manual page 57

Re: Please note NV-720R is a remote side(CPE side), it must be connected to the CO side to work.
Answer: Tone mode, Band profile and band plan setting must be compatible to each other if not access error
will show when applied. Please deactivate and activate once the setting has been changed.
We need to set up a default gateway on a NV-720 pair which are in Bridge mode, as they want to
8. Question:
manage the units from a different network.
When the application is used within the LAN, the switch(bridged) mode is not necessary to set up a
gateway .However, if the application crosses various network segments (LAN to WAN or WAN to
LAN), you must set up a gateway to connect different network segment.
Regarding how to configure a default gateway at switch(bridged) mode for crossing various network
segments .
Answer: Configuration gateway example from static routing:
Destination LAN IP:
Subnet Mask:
Gateway: 255-255-255-0
Note: Static Routing functionality is used to define the connected Gateway between the LAN and
WAN.
9. Question: Is it possible to use ADSL2 IP DSLAM with the NV-720R?
NV-720R support the ADSL backward compatible, therefore the NV-720R can connect to ADSL2 IP
Answer:
DSLAM(Annex B).
NV-720R ADSL2+/ VDSL2 Modem Router USER'S MANUAL Ver. A.2
0-0-0-0
0-0-0-0
56