netsys NV-720R User Manual page 13

2.6.1 Connect the NV-802S and the NV-720R to the Line
The objective for VDSL2 is to pass high speed data over a twisted pair cable. In the setup, connect NV-802S to NV-720R
through phone wire(24~26 AWG) or line simulator or any other hardware representation of a cable network, with or without noise
injection and crosstalk simulations.
2.6.2 Connect the NV-802S and the NV-720R to LAN Devices
In the setup, usually an Ethernet tester serves as a representation of the LAN side as well as a representation of the WAN side.
2.6.3 Run Demos and Tests
The Ethernet tester may send data downstream as well as upstream. It also receives the data in order to check the integrity of
the data transmission. Different data rates can be tested under different line conditions.
NV-720R ADSL2+/ VDSL2 Modem Router USER'S MANUAL Ver. A.2
12