Assembly Instructions - Kenmore 125.22614610 Use & Care Manual

Please pay special attention to these hazard alert boxes, and follow any instructions
given. WARNING statements alert you to such dangers as ore, electric shock, burns
and personal injury. CAUTION statements alert you to such dangers as personal
injury and/or property damage.
WARNING
Electrical Shock Hazard
DO NOT plug into electrical supply until
assembly is complete. Failure to do so
could result in electrical shock or injury.
Before assembling vacuum cleaner, check
the PACKING LIST (page 2). Use this list
to verify that you have received all the
components of your new Kenmore
vacuum cleaner.
®
POWERMATE
Insert telescoping wand into PowerMate
until the wand button snaps into place. A
noticeable "click" should be heard.
To remove: Press wand quick release
pedal and pull telescoping wand out of
®
PowerMate .
HANDLE
Insert handle into telescoping wand until
lock button snaps in place. Be sure hose is
not twisted.
To remove: Press handle quick release
button and pull up on handle.
To store: Disconnect hose from
telescoping wand and canister to prevent
stress on hose during storage. Store hose
in a loosely coiled position so the hose
covering is not stressed.

ASSEMBLY INSTRUCTIONS

®
- 8 -
Handle
Lock
Button
Handle
Quick
Release
Button
Wand Length
Adjust Button
®
PowerMate
Telescoping
Wand
Wand
Button
Wand Quick
Release Pedal