Kenmore 125.22614610 Use & Care Manual page 18

The prHoOWHU LV ORFDWed inside the dust
cup. Check the prHoOWHU Irequently and
clean when dirty.
1. Remove the dust cup as outlined in the
EMPTYING DUST CUP (page 17).
NOTE: Make sure dust cup is free of
debris before opening.
2. Rotate dust cup lid assembly
counterclockwise as indicated on the lid
and lift oç.
Dust Cup
Lid Assembly
3. Grasp prHoOWHU
and rotate
counterclockwise
to remove.
4. Clean prHoOWHU
by gently tapping
over a trash
container. Tap on
several sides to
ensure best
cleaning.
If necessary, rinse with cold water only,
DO NOT use detergent or soap. Allow
parts to dry 24 hours before putting back
into vacuum cleaner.
DO NOT wash in the dishwasher.
DO NOT install damp.
PRE-FILTER CLEANING
LOCKED
(For Use)
UNLOCKED
(For Cleaning)
Pre-Filter
To Reinstall:
1. Align the slots
on the prHoOWHU
with the
alignment tabs
inside dust cup
lid assembly.
2. Rotate pre-
oOWHU FORFNZLVH
to lock in
place.
3. Replace the lower portion of the dust
cup by aligning marks as shown,
UNLOCKED (For Cleaning).
4. Rotate while pressing downward until
marks align as shown; LOCKED (For Use).
5. Reinstall the dust cup. See EMPTYING
DUST CUP (page 17).
- 18 -
Tabs
Slots
UNLOCKED
(For Cleaning)
LOCKED
(For Use)