Table of Contents
Advertisement
6.7
Mask Area Setup
In some cases, you may want to mask a sensitive area. This area will not be previewed or
recorded. The mask area setup steps are following:
Step 1: Enter into "Image Setup" menu:
Step 2: Select a camera: You can use【á】 【â】keys to select the camera.
Step 3: Enter into mask area setup interface: Enable the check box beside "Privacy Mask",
you can press【EDIT】key to change the flag into "ü", and activate "Area" button. Move "Active
Frame" to "Area" button on the right side of mask check box, press【ENTER】key to enter into
mask area setup interface.
User Manual for Commercial Series Net DVR
Page
Total
60
121
Advertisement
Table of Contents
