Cleaning The Milk System; Cleaning The Brewing Unit - Bosch TIS3.1 Series Instruction Manual

Fully automatic espresso machine
Hide thumbs Also See for TIS3.1 Series:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
en Daily care and cleaning

Cleaning the milk system

T he milk system must be cleaned after
C l e a n i n g t h e m i l k s y s t e m
each use to remove residues.
:
Warning
Risk of burns!
The milk frother gets very hot. Hold only
by the handle. After use, let it cool down
first before touching it.
Fill a glass half-full with water and
1.
place under the outlet system.
Push the milk frother right down.
2.
Touch the Milk button to clean the
3.
milk system.
Push the milk frother right up and
4.
allow it to cool down.
Dismantle the milk frother into its
5.
individual parts and clean
thoroughly.
~ Fig. &
Dry the individual parts, reassemble
6.
and fit back onto the appliance.
Notes
To stop the process before the end,
touch Milk again.
All parts of the milk system should
be cleaned in the dishwasher.
Detergent residues in the milk
system must be thoroughly removed
following the rinsing process.
18

Cleaning the brewing unit

~ Fig. $, ~ Fig. %
In addition to automatic cleaning, the
brewing unit should be removed
regularly for cleaning.
Caution!
Clean the brewing unit without detergent
or products containing vinegar or acid
and do not place in the dishwasher.
Remove the brewing unit:
Switch off the appliance.
1.
Open the door to the brewing
2.
chamber.
Remove the coffee grounds
3.
container.
Push the red lever up, grasp the
4.
brewing unit by the handle and pull
forwards carefully.
Rinse the brewing unit thoroughly
5.
under warm, running water.
Clean the interior of the appliance
6.
thoroughly with a damp cloth,
removing any coffee residues.
Allow the brewing unit and the
7.
interior of the appliance to dry.
Insert the brewing unit:
Hold the brewing unit only by the
1.
handle.
Push the red lever up, position the
2.
brewing unit underneath and slide
back as far as it will go. The lever
must snap into place.
Insert the coffee grounds container
3.
again and close the door.
Important: If the brewing unit has not
been inserted, or the brewing unit or
drip tray not inserted correctly, it will not
be possible to close the door.

Advertisement

Table of Contents
loading

Table of Contents