Recording Setup - Q-See QSC26404 QH32DVR4C User Manual

5.12 Recording Setup

In the main menu, there is an icon called "Recording". You can enter into recording menu as
follows:
"Recording" menu description:
If HDD is Full: There are two options: "Overwrite" and "Stop recording". If you select the
"Overwrite" option, when the HDD in the DVR is full, the DVR will overwrite the earliest
recorded files and continue recording. If you select "Stop recording" option, when the HDD is full
the DVR will handle it as a "Hard Disk Full" exception, please refer to Chapter 5.17 for exception
menu.
Select Camera: Here all channels are listed. You can use
Stream Type: There are two options, one is "Audio&Video" stream and the other is "Video"
stream only. If you want to record video and audio, please select "Audio&Video" option,
otherwise you can select "Video" option to record only video.
Note: If you change this option, please reboot DVR to make parameter effective.
Resolution: The higher the resolution is, the clearer the image is. The resolution options
from low to high are: QCIF and CIF.
Note: If you change the resolution option, please reboot the DVR to make it effective.
QH32DVR4C User's Manual
Fig 5.20 Recording channel configuration
54
【 ↑ 】 【 ↓ 】
k eys to select one.