Setup; Connecting The Ac Power Cord - Citizen CT-S251 User Manual

3. SETUP

3.1 Connecting the AC Power Cord

1. Turn off the power.
2. Connect the power connector to the AC adapter cable connector. Next, connect the
AC power cord to the AC inlet, and insert the plug into an electric outlet.
CAUTION
 Use only the specified AC adapter.
 Always hold the AC adapter's cable connector by the connector when removing or inserting
it.
 Use an AC power source that does not also supply power to equipment that generates
electromagnetic noise.
 Pulling on the AC power cord may damage it, cause a fire, electric shock, or break a wire.
 If a lightning storm is approaching, unplug the AC power cord from the electric outlet. A
lightning strike may cause a fire or electric shock.
 Keep the AC power cord away from heat generating appliances. The insulation on the AC
power cord may melt and cause a fire or electric shock.
 If the printer is not going to be used for a long time, unplug the AC power cord from the
electric outlet.
 Place the AC power cord so that people do not trip on it.
Cable connector
AC power cord
Power connector
AC adapter
AC inlet
— 18 —