Multi-Level Security Arming - Python 871XP Owner's Manual

➤
If a door is opened, the system will immediately start
chirping the siren and flashing the parking lights. Three
seconds later, the siren output changes to a continuous blast.
This progressive response gives you time to disarm the system
with your 2-way remote if you inadvertently open the door
while the system is armed, while still providing instant re-
sponse (even if the door is immediately closed).
➤
Turning on the ignition key will trip the same progressive re-
sponse as opening a door.
➤
The optional starter kill prevents the vehicle's starter from cranking.
➤
Any full trigger of the alarm system will immediately send an
alarm page to your remote informing you that your vehicle
should be checked.
➜

multi-level security arming

Multi-Level Security Arming allows you to select which of the
system's inputs or sensors will be active and which will be
bypassed when the system is armed. (See Table of Zones section
of this guide.) Pressing
again within five seconds of arming the system will activate the
Multi-Level Security feature. Each time
different security level is selected. The different security levels are
selected as follows:
➤ Press
➤ Press
twice followed by a long chirp. Zone 2 is now bypassed.
➤
Press
three times followed by a long chirp. Zone 4 is now bypassed.
© 2005 directed electronics—all rights reser ved
(only in Standard Configuration)
once: The siren chirps once. The system is armed.
a second time within five seconds: The siren chirps
a third time within five seconds: The siren chirps
is pressed again, a
17