Multi-Level Security Arming - Python 671XP Owner's Manual

multi-level security arming

Multi-Level Security Arming allows you to select which of the
system's inputs or sensors will be active and which will be
bypassed when the system is armed. (See Table of Zones section
of this guide.) Pressing
again within five seconds of arming the system will activate the
Multi-Level Security feature. Each time
different security level is selected. The different security levels are
selected as follows:
Press once: The siren chirps once. The system is armed.
Press a second time within five seconds: The siren
chirps twice followed by a long chirp. Zone 2 is now
bypassed.
Press a third time within five seconds: The siren chirps
three times followed by a long chirp. Zone 4 is now
bypassed.
Press a fourth time within five seconds: The siren chirps
four times followed by a long chirp. Zones 2 and 4 are now
bypassed.
Press a fifth time within five seconds: The siren chirps
five times followed by a long chirp. All input zones, except
the ignition, are now bypassed.
note: Multi-Level Security Arming only applies to a sin-
gle arming cycle. Once the system is disarmed and then
re-armed, all the zones will be active again.
© 2004 directed electronics, inc.
(only in Standard Configuration)
is pressed again, a
13