Python 871XP Owner's Manual page 28

When you are ready to drive the vehicle:
note: If the brake pedal is pressed before the key is in the
ON position, the engine will shut down.
While the vehicle is running during remote start operation, the
system will monitor the vehicle and will automatically shut down the
engine if the system receives any of the following shut-down inputs:
➤ The brake pedal is pressed.
➤ The hood is opened.
➤
The shutdown toggle button is put into the OFF position.
➤
The pre-programmed run time (12, 24, or 60 minutes) has
elapsed.
➤ 2-way remote button
vehicle.
➤
The remote responds with remote start off tones and the
Yellow LED flashes 3-times.
© 2005 directed electronics—all rights reser ved
1. Insert the ignition key and turn
it to the ON (not the START)
position.
2. Press the brake pedal.
is pressed twice again to stop the
25