Honda FJ500 Owner's Manual page 78

Hide thumbs Also See for FJ500:
Table of Contents

Advertisement

TECHNICAL & CONSUMER INFORMATION
Problems That May Affect Emissions
If you are aware of any of the following symptoms, have your engine
inspected and repaired by your authorized Honda servicing dealer.
Hard starting or stalling after starting
Rough idle
Misfiring or backfiring under load
Afterburning (backfiring)
Black exhaust smoke or high fuel consumption
Replacement Parts
The emission control systems on your new Honda engine were
designed, built and certified to conform to applicable emission
regulations. We recommend the use of Honda Genuine parts
whenever you have maintenance done. These original design
replacement parts are manufactured to the same standards as the
original parts, so you can be confident of their performance. The use
of replacement parts that are not of the original design and quality
may impair the effectiveness of your emission control system.
A manufacturer of an aftermarket part assumes the responsibility that
the part will not adversely affect emission performance. The
manufacturer or rebuilder of the part must certify that use of the part
will not result in a failure of the engine to comply with emission
regulations.
Maintenance
Follow the MAINTENANCE SCHEDULE on page
that this schedule is based on the assumption that your machine will
be used for its designed purpose. Sustained high-load or high-
temperature operation, or use in unusually wet or dusty conditions,
will require more frequent service.
43
. Remember
77

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents