Table of Contents
Advertisement
F2X64 User Manual
O – On. Set the RTU power on time.
S – Shut Down. Set the RTU power off time.
Setting type, [IP] use for power on, C use for power off
T -- Time. Set the action time point.
H -- per Hour. Set a time point of every hour
D -- per Day. Set a time point of every day
W -- per Week. Set a time point of every week
M -- per Month. Set a time point of every month
I -- Interval. Set the time interval.
P -- Power always on.
C -- Count down. Set the count down length.
1. Disable
AT Command:
AT+EXCALx=D
Note: There is no blank in this AT command, the same as followings.
2. On-time switch power on
68 / 103
Email: allen@four-faith.com
Tel: +86-17750019379
Web: www.four-faith.hk
Add: Floor 11, Area A06, No 370, chengyi street, Jimei, Xiamen, China
Advertisement
Table of Contents
