Four-Faith F2164 User Manual page 10

 Adopt terminal block interface, convenient for industrial application
 Support standard RS232 and RS485(or RS422) port that can connect to serial devices directly
 TTL logic level RS232 interface can be customized
 Support intellectual mode, enter into communication state automatically when powered
 Provide management software for remote management
 Support several work modes
 Convenient configuration and maintenance interface
High-performance
 8 ch acquisition analog input （resolution： 16bit） Input voltage （ 0-5V） ,Input current （0-20mA） ,
Sampling rate(1.365kSPS)
 4 ch relay output（5A/30VDC,5A/250VAC）
 4 ch optocoupler isolation output,open collector to 30V,40mA max.load,power consumption
125mW
 8 ch Digital input（ "0" ：0-3.3V， "1" ：5-24V）. Contains all the way count function
 2MB SPI FLASH
 Support dual data centers, one main and another as backup
 Support multiple data centers , it can support maximum 5 data centers
 Support multi-center multi-function(for example: one data center is MODBUS RTU protocol
function, another data center is RTU extended protocol function)
 Support multiple online trigger ways, including SMS, ring and data. Support link
disconnection when timeout
 Support dynamic domain name(DDNS) and IP access to the data center
 Support RS232/RS485 MODBUS RTU protocol
 Support TCP MODBUS RTU protocol using TCP2COM software that converts TCP to
virtual serial port
 Support 8 digital inputs and 8 analog input manual query and automatic report
 Support 4 optocoupler isolated output ports and 4 relay outputs controlled via MODBUS
RTU protocol
 Support pulse counter initiate value configurable, Its realtime value can be queried via
MODBUS RTU protocol
 Support RTU extended protocol.
 Acquisition data(8 analog inputs and 8 digital inputs) is reported periodically via RTU
extended RTU protocal.
 Support RTU extended protocol. Reporting mode can be selected. there are three reporting
mode, including Network only, SMS only and Main network SMS backup(it uses SMS. when
network connect fail)
 Support RTU extended protocol.When reporting acquisition data failure, acquisition data are
saved to 2M byte SPI FALSH
 Support RTU extended protocol. The data center can query acquisition data actively
 Support RTU extended protocol. It has counter function that the initial value of the timer is
set and the value of the timer is queried
，Accuracy ±0.5% or better
Email: allen@four-faith.com
Add: Floor 11, Area A06, No 370, chengyi street, Jimei, Xiamen, China
F2X64 User Manual
Tel: +86-17750019379 Web: www.four-faith.hk
10 / 103