Data Service Center Settings - Four-Faith F2164 User Manual

F2X64 User Manual

4.1.4.6 Data Service Center Settings

Settings on this page are the parameters related to Data Service Center (DSC).
◆ Data Center Number
RTU support two Data Service Center (abbreviation: DSC)methods to transmit data.
Main and Backup: RTU always tries to connect with the Main DSC. If fails to connect with Main
DSC, it will connect with Backup DSC at once
Note：If no Backup DSC exists, please configure the Backup DSC same as Main DSC.
Multi Data Service Center: RTU can connect with at most five DSC at the same time. All the
multi DSC can receive the same application data .
If the Data Center Number is 0,there is no DSC working.
If the Data Center Number is 1, RTU work in Main and Backup DSC mode.
52 / 103
Email: allen@four-faith.com Tel: +86-17750019379 Web: www.four-faith.hk
Add: Floor 11, Area A06, No 370, chengyi street, Jimei, Xiamen, China