Crowcon Triple Plus+ User Manual page 30

Accessories and spares
0– 100 ppm nitric oxide
0– 25% vol oxygen
0– 10ppm hydrogen chloride*
0– 25ppm hydrogen cyanide
0– 50ppm ammonia
0– 2000ppm hydrogen
0– 2ppm phosphine
0– 100ppm volatile organics**
0– 10ppm ethylene oxide
0– 10ppm hydrogen fluoride
Triple Plus+ IR only
Sensor assemblies:
Sensor Module Methane 0–100% LEL (UK)
Sensor Module Methane 0–100% LEL (ATEX)
Sensor Module Methane Dual Range 0–100% LEL & 0–100% Volume (ATEX) S011317/A
Sensor Module Propane 0–100% LEL
Sensor Module Propane Dual Range 0–100% LEL & 0–100% Volume
Sensor Module Butane 0–100% LEL
Sensor Module Butane Dual Range 0–100% LEL & 0–100% Volume
Sensor Module Ethylene 0–100% LEL
Sensor Module Ethylene Dual Range 0–100% LEL & 0–100% Volume
Sensor Module Acetylene 0-100% LEL
Sensor Module Acetylene Dual Range 0-100% LEL & 0-100% Volume
Triple Plus+ IR Membrane Switch Assembly
Note: IR sensors should not be fitted in and will not be recognised by standard Triple Plus+
units.
For additional spares please contact Crowcon
*Readily absorbed gases – they will not be detected if an aspirator or hose are used and are
unsuitable for use in pumped instruments.
**This broad range sensor has a high level of cross sensitivity and it can be used to monitor
many gases.
For additional spares please contact Crowcon
26
Triple Plus+ and Triple Plus+ IR
S01245
S011371
S01724
S01725
S01726
S01250
S01252
S011367
S011366
S01832
S011316/U
S011316/A
S011318
S011319
S011320
S011321
S011322
S011323
S011790
S011792
E01823