Disassembly - Pioneer FX-MG8247ZT/ES Service Manual

1

7.1.3 DISASSEMBLY

Note)
Never hold this figure's upper part such as transfer grille, hazard switch. Hold within the
A
hatchingline part, lower of the illustration.
B
Note)
C
For the installation position is fixed as the factory setting position, never disassemble the bracket
which is showed at Fig. 4 and 5. If the position is changed, it is impossible to maintain the installation
accuracy to customer's vehicle.
-
Removing the Grille Assy (Fig.1)
Remove the six screws and then remove the
Grille Assy.
D
Note : This unit may appear slightly
different to the unit shown at right.
E
F
130
1
2
TRAF TRAF
AM SAT AM SAT
FX-MG8247ZT/UC
2
3
Grille Assy
3
4
Fig.1
4