Advertisement
CT-660,CT-SI
3. DISASSEMBLY
Disassembly of Tape Transport Unit
Motor Replacement
1.
Remove the bonnet.
1.
Remove the tape transport unit from the deck.
2. Disconnect the motor jead wires from the motor.
Undo the two screws
in the rear panel
2. Temporarily pass the counter belt around a chassis
3. Remove the drive belt B and then remove the drive belt A.
hook.
Drive belt A Oo
Drive belt 7
3. Open the cassette. door.
4.
Temporarily pass the capstan belt around a chassis boss.
Counter blet
4. Undo the four screws securing the tape transport unit,
pull the unit out towards the rear.
Capstan belt
Advertisement
