Disassembly - Pioneer KEX-900 Service Manual

2. DISASSEMBLY
® Case Removal (Fig. 2)
1. Remove 4 screws, then remove the case unit.
Case Unit
Fig. 2
@ Removal of Cassette Mechanism Assy (Fig. 3)
1. Remove 4 screws, disconnect the connector, then remove
the cassette mechanism assy.
Fig. 3
@ Removal of Dolby NR P. C. Board (Fig. 4)
1. Remove 1 "B" screw.
2. The Dolby NR p. c. board is connected to the control
unit by the connector indicated by the arrow, so remove
the board by lifting if upward.
@ Chassis Removal (Fig. 4)
1. Remove 3 "A" screws, then remove the chassis unit.
Chassis Unit
Fig. 4
@ Grille Assy Removal (Fig. 5)
1. Remve 2 screws and the soldering indicated by the arrow.
2. Remove the connector indicated by the arrow, then
remove the grille assy.
id