Table of Contents
Related Manuals for Wonwoo WCM-121N
Summary of Contents for Wonwoo WCM-121N
- Page 1 Installation / Operating Manual 12X Day&Night MINl PTZ CAMERA Distributed by 388057165 Before attempting to connect or operate this product, PRINTED IN KOREA please read these instructions carefully and save this manual for future use...
-
Page 2: Table Of Contents
CONTENTS USER INFORMATION CAUTION 1. USER INFORMATION RISK OF ELECTRIC SHOCK DO NOT OPEN 2. FEATURES CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, 3. PRECAUTIONS DO NOT REMOVE COVER (OR BACK). 4. PTZ SETTING & INSTALLATION NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED Box Contents SERVICE PERSONNEL. -
Page 3: Features
• Programmable Privacy Masking(4 Zones) It can damage CCD. • RS-422, RS-485 communication • Multiple protocol (Pelco-D, Pelco-P , Wonwoo) Do not expose the camera to rain or spill beverages on it. • Built-in Menu System for Setup of Programmable Functions •... -
Page 4: Ptz Setting & Installation
PTZ SETTING & INSTALLATION PTZ SETTING & INSTALLATION Box Contents Camera should be installed by qualified service personnel in accordance with all local and federal electrical and building codes. The system should be installed according to as Unpack carefully. Electronic components can be damaged if improperly handled or dropped. If an item appears to described have been damaged in shipment, replace it properly in its carton and notify the shipper. -
Page 5: Rs-485 Setting
PROTOCOL of the bracket. STEP 2 OFF OFF OFF OFF OFF OFF OFF OFF NONE 2400bps WTX (WONWOO) STEP 3. Connect the external cables to included installation cables (Video, DC12V power, RS-485 communication, EVEN 4800bps OFF OFF WPD (PELCO-D) OFF OFF... -
Page 6: On Screen Display Menu
PTZ SETTING & INSTALLATION On Screen Display Menu 1 Initialize STEP 4 STEP 4. Connect the camera with the provided Installation cable. The arrow mark on the cable connector When the device is powered on, you can check the address, should be facing upwards (see diagram). - Page 7 On Screen Display Menu On Screen Display Menu - LABEL Setting - TOUR NO Press key. NEAR TOUR MENU PRESET LABEL EDIT <001> TOUR MENU Select character by using joystick and press key. NEAR LABEL : PRESET 001 TOUR NO : 01 DEFINE LABEL TOUR EDIT...
- Page 8 On Screen Display Menu On Screen Display Menu 3) Scan - START POSITION By using scan function, the camera moves between 2 positions if there is no PTZ command after SCAN MENU SCAN START POSITION passing the assigned dwell time. The scan function runs and the camera moves from the position assigned as the start point to the position assigned as the end point in CW (Clockwise) direction.
- Page 9 On Screen Display Menu On Screen Display Menu - DWELL - LABEL The Scan function runs after the dwell time without any camera SCAN MENU PATTERN LABEL EDIT <01> PATTERN MENU movement. SCAN NO : 01 DEFINE LABEL : Tiime (0 ~60 sec ) PATTERN NO : 01 UNDEFINE LABEL...
- Page 10 On Screen Display Menu On Screen Display Menu - START PAN POSITION 5) AREA The area function means that it displays the area name between two programmed pan positions. AREA MENU AREA START POSITION Maximun 4 area functions are toured in order. AREA NO : 01 DEFINE LABEL...
- Page 11 On Screen Display Menu On Screen Display Menu - ALARM NO “Save” above setting alarm data to the memory. ※ - "Save" above setting data to the memory. AREA MENU ALARM SELECT - "CLR" means above setting pattern data will not be saved and be cleared. - "BACK"...
- Page 12 On Screen Display Menu On Screen Display Menu 3 Dome Menu - TIME ＊TIME (MIN) : The park time can be assigned from 5 min to 60 min(5min,10min ~60min) PARK MENU Pan, Tilt, Zoom motion is adjustable in the “Dome Setting” menu. MAIN MENU TIME : 02MIN...
-
Page 13: Camera Menu
On Screen Display Menu On Screen Display Menu 4 Camera Menu 5) SPEED BY ZOOM - SPEED BY ZOOM Camera menu is subject to be changed without prior notice to upgrade and quality increase Pan and tilt speed can be changed depending on zoom magnification. and we may use slip sheet for the change. - Page 14 On Screen Display Menu On Screen Display Menu - AF MODE 2) FOCUS In focus menu, you can set up the focus mode among Auto, AF MODE: Set the auto focus mode FOCUS MENU CAMERA MENU One Push or Manual. ▶...
- Page 15 On Screen Display Menu On Screen Display Menu - SHUTTER SPEED - AGC MODE Select ON/ OFF in AGC MODE. If you set SHUTTER in the AE MODE, you can control image AE EXPO.MENU AUTO EXPO.MENU brightness by adjusting shutter speed. Select : Set ON : AE MODE...
- Page 16 On Screen Display Menu On Screen Display Menu - WB MODE 6) SPECIAL WB MODE: Set the color depend on white balance. WHITE BALANCE MENU In the Special menu, it’s available to set SUB SP MODE, Select AUTO, INDOOR, OUTDOOR, ONEPUSHWB, MAIN MENU APERTUREGAIN, FLICKERLESS, BACK LIGHT, LINE LOCK, WB MODE : ATW...
- Page 17 On Screen Display Menu On Screen Display Menu - BACK LIGHT - HLC CLIP LEVEL Select ON/OFF in the BACK LIGHT function. HLC CLIP LEVEL : Select HLC function ON and set the HLC SPECIAL MENU SPECIAL MENU CLIP LEVEL.(0~06) SUB SP MODE ▶...
-
Page 18: Ptz Reset
On Screen Display Menu On Screen Display Menu - WDR MODE 5 Clear Menu Set the WDR MODE from OFF, LEV1 ~LEV7. SPECIAL MENU Clears the PTZ position and function value. SUB SP MODE ▶ Select : Set ON : NEAR APERTUREGAIN : 07 MAIN MENU... - Page 19 Disp Sel / Init Sel / Set Title / Set Init Msg / Language Disp Sel(Off / On) ID / Title / Zoom Ratio Init Sel(Off / On) ID / Baud Rate / Protocol / Version / Init Msg Protocols PELCO-D, PELCO-P , WONWOO Communication RS-485 Power Consumption DC12V(±10%), 1.5A Operating Temperature 0ºC ~ +50ºC (Indoor )
- Page 20 QUICK COMMAND Memo PROTOCOL FUNCTION WONWOO GOTO PRESET 1~63 PRESET 1~63 PRESET 1~63 PRESET SET PRESET 1~63 SET PRESET 1~63 SET PRESET 1~63 SET PRESET GOTO TOUR 71~78 PRESET 71~78 PRESET 71~78 PRESET SET TOUR 71~78 SET PRESET 71~78 SET PRESET...
Need help?
Do you have a question about the WCM-121N and is the answer not in the manual?
Questions and answers