Advertisement
Installation Checklist
Installation Checklist
The Installation Checklist lists the procedures for initial hardware installation of a new RPM-XF. Make
a copy of this checklist and mark the entries as you complete each procedure. Include a copy of the
checklist for each system in your Site Log (see the next section,
RPM-XF installation checklist for site _________________________________________
Installation Checklist
Installation checklist copied
Background information placed in the Site Log
Site power voltages verified
Required tools available
Additional equipment available
MGX RPM-XF received
MGX-XF-UI or MGX-XF-UI/B received
Cisco Documentation CD received
Cisco Information Packet received
Cisco MGX Route Processor Module (RPM-XF)
Installation and Configuration Guide received
Optional printed documentation received
Chassis components verified
Initial electrical connections established
ASCII terminal or PC attached to MGX-XF-UI or
MGX-XF-UI/B console port
Signal distance limits verified
RPM-XF and MGX-XF-UI or MGX-XF-UI/B properly
installed in corresponding chassis slots.
Startup sequence steps completed
Initial system operation verified
Software image verified
Creating a Site Log
The Site Log provides a record of all actions relevant to the RPM-XF. Keep it near the chassis where
anyone who installs or maintains the RPM-XF has access to it. Use the Installation Checklist (see the
previous section,
RPM-XF. Site Log might include the following entries:
•
Cisco MGX Route Processor Module (RPM-XF) Installation and Configuration Guide
2-4
"Installation
Installation progress—Make a copy of the "Installation Checklist" and insert it into the Site Log.
Fill in the checklist as you complete each procedure.
Checklist") to verify the steps in the installation and maintenance of your
Chapter 2
Preparing to Install the MGX RPM-XF
"Creating a Site
Log").
Verified by
Date
OL-13644-01
Advertisement
