Menu Language
MENU m →
System
→
Menu Language
Set the menu language.
― A change to the language setting will only be applied to the onscreen menu display. It will
not be applied to other functions on your PC.
Multi Control
MENU m →
System
→
Multi Control
→ ENTER E
Configuring settings for Multi Control
•
ID Setup
Assign an ID to a set. (Range: 0~99)
Press u or d to select a number, and press E.
•
ID Input
Enter the ID number of the product connected to the input cable for input signal reception.
Enter the number you want using the number buttons on the remote control.
•
PC Connection
Select a method to connect to MDC to receive the MDC signal.
–
RS232C cable
Communicates with the MDC via a RS232C cable.
–
RJ-45 (LAN)/Wi-Fi Network
Communicate with MDC over Wi-Fi.
→ ENTER E
81