Eco Solution; Energy Saving; Eco Sensor; No Signal Power Off - Samsung DC43H User Manual

Eco Solution

MENU m → System → Eco Solution → ENTER E
Eco Solution

Energy Saving

Eco Sensor

No Signal Power Off

Auto Power Off

– The displayed image may differ depending on the model.
Energy Saving
Reduce the power consumption by adjusting the screen brightness.
•
Eco Sensor
To enhance your power savings, the picture settings will automatically adapt to the light in the room.
Off
•
Off
― Adjusting the
― If the screen contrast is not sufficient, set the
15 min
Off
Min. Backlight
When
backlight mode. Make sure the
― If
No Signal Power Off
Save power by turning the device off when no signal is received from any source.
•
― Disabled when an attached PC is in power saving mode.
― The product will automatically power off at a specified time. The time can be changed as required.
Auto Power Off
The product will automatically turn off if you don't press a button on the remote or touch a button on product front
panel within 4 hours to prevent overheating.
•
Off / Low / Medium / High
Off / On
Backlight setting under
If the Eco Sensor is Off, it may not comply with energy standards.
Eco Sensor is On, you can manually adjust the minimum screen brightness.
Min. Backlight
Eco Sensor is On, the display brightness may change (become slightly darker or brighter) depending on the
surrounding light intensity.
Off / 15 min / 30 min / 60 min
Off / On
Picture while Eco Sensor is on will disable the Off.
Eco Sensor to Off.
setting is lower than the Backlight
Min. Backlight is the darkest
setting.
84