Oriental motor CSK243-ATA Operating Manual page 36

7 Setting
Setting method for CSD2109-T, CSD2112-T, CSD2120-T
An ammeter or tester is needed to set the motor current. Note that a tester is required
only for the CSD2109-T, CSD2112-T and CSD2120-T.
• Connecting an ammeter or tester
Connecting an ammeter:
Connect the driver, motor and DC ammeter.
2-phase stepping motor
Connecting a tester:
Connect the driver and motor.
2-phase stepping motor
Insert the tester probes [approx. 2.1 mm (0.08 in.) in diameter] into the motor
current check terminals (C.C.+, C.C.−). Set the tester to the voltage measuring
range.
C.C.+
−36−
Motor leads color
Yellow
White
Black
Green
Red
Blue
Motor leads color
Yellow
White
Black
Green
Red
Blue
C.C.-
Driver TB2
YELLOW
WHITE
BLACK
GREEN
RED
BLUE
Driver TB2
YELLOW
WHITE
BLACK
GREEN
RED
BLUE