Diamondback 910T Operating Instructions Manual page 20

Operation and Adjustment
BODY FAT ANALYSIS
1.Turn on the treadmill, press "program" button
until the main window displays "FAT".
2.Press the "MODE" button, the "pro." window is
displaying "F-1", the main window is displaying
"01", Press "Speed +" or "Speed -" Key (or press
"Incline +" or "Incline -" key then the main window
will change to" 01" or "02 ", Please select your
sexual distinction, " 01" – Male, "02" – Female.
3.Press the "MODE" key again,the "pro." window is
displaying "F-2", the main window displays: "25" –
Which is the treadmill preset user's age. Press
"Speed +" or "Speed -" button (or press "Incline +"
or "Incline-" button) to select your correct age.
(Range is: 10 – 99).
4.Press the "MODE" button again, the "pro."
window is displaying "F-3",the main window
displays "67" – Which is the treadmill preset user's
body height 67 in. Press "Speed +" or "Speed -"
FAT
F-1
F-2
F-3
F-4
F-5
Body Fat Scale Parameter Table
ITEM
Sex
Age
Height
Weight
Body Fat
button or press "Incline +" or "Incline -" key to
select your correct body height. (Range is: 39-78
in).
5.Press the "MODE" button again, the "pro."
window is displaying "F-4",the main window
displays: "150" Which is the treadmill preset
user's body weight 150lbs. Press "Speed +" or
"Speed -" button or press "Incline +" or "Incline -"
key to select your correct body weight. (Range is:
44-330 lbs).
6.Press "MODE" key again, the "pro. " window is
displaying "F - 5" and the main window is
displaying: " --- " . Grasp the two handle pulse
sensor with your two hands and hold for about 5
seconds, the main window will display your
desired body fat rate, refer to below table for your
body fat date.
SET OR ANALYSIS DATA
01-Male
<19
20~24
25~29
>30
1
9
02-Female
10-99 (25)
39-78 in
44-330 lbs
Under weight
Normall weight
Over weight
Obesity