Front Wheels - Kubota BX2380 Operator's Manual

WHEEL TREAD
(1) Bolt
Front
Rear
2. Then recheck as the following table.
See SERVICE INTERVALS on page
After driving the tractor 200 m (200 yards),
Timing to recheck
after 1 day (8 hours), and thereafter every
the bolts
50 hours
NOTE :
• Use the tapered bolts for wheels with beveled or
tapered holes.

1. Front wheels

IMPORTANT :
• Do not turn the front discs to obtain wider tread.
• Always attach tires as shown in the figures in
the following table.
If you not attach the front wheel as illustrated in
the table, transmission parts may be damaged.
You can not adjust width of the front tread.
BX1880, BX2380, BX2680
Tightening torques
149.2 N⋅m to 179.0 N⋅m
(15.2 kgf⋅m to 18.3 kgf⋅m)
[110 lbf⋅ft to 132 lbf⋅ft]
108.5 N⋅m to 130.2 N⋅m
(11.1 kgf⋅m to 13.3 kgf⋅m)
[80 lbf⋅ft to 96 lbf⋅ft]
69.
TIRES, WHEELS, AND BALLAST
Models BX1880
16x7.50-8 Turf, 16x7.50-8
Tire
Bar
Tread
(A) 930 mm
(36.6 in.)
How to jack up the front axle
WARNING
To avoid serious injury or death:
• Before jacking up the tractor, park it on a firm
and level ground and chock the rear wheels.
• Fix the front axle to keep it from pivoting.
• Select jacks that withstand the machine weight
and set them up as shown in the following
figure.
(1) Front axle case
BX2380 and BX2680
18x8.50-10 Turf,
18x8.50-10 Bar,
18x8.50-10 Ind.
(2) Jack points
65