Front Loader; Weight Of The Implements As The Rear Ballast - Kubota BX2380 Operator's Manual

IMPLEMENT LIMITATIONS

FRONT LOADER

Check fixation points on the body of the tractor where
the front loader must be installed.
Install the front loader frame to the frame of the tractor
as shown in the following figures.
Location Bolt/Nut
Main frames M14 bolts or nuts
(1) 6-M14 bolts
DANGER
To avoid personal injury or death:
• Make special attention when lifting the load,
keep the bucket correctly positioned to prevent
spillages.
IMPORTANT :
• Not all risks are listed.
• Refer to the front loader operator's manual.
26
Required Torque
147 N⋅m
(15.0 kgf⋅m)
[108 lbf⋅ft]
WEIGHT OF THE IMPLEMENTS
AS THE REAR BALLAST
To avoid serious injury or death:
• For tractor stability and operator's safety, the
Box Blade
Rear Blade
Rotary Tiller
Ballast Box
WARNING
rear ballast should be added to the rear of the
tractor in the form of 3-point counter weight and
the rear wheel ballast. The amount of the rear
ballast will depend on the application.
Implement as Counter Weight
FRONT LOADER
Approx. 190 kg (420 lbs.)
BX1880, BX2380, BX2680