Table of Contents
Advertisement
4
Troubleshooting
Use this section to solve problems you may have while setting up your print server.
Indicator light status
Indicator light pattern:
Power indicator
USB Status
Wireless Status
USB Status and Wireless
Status
Note: To locate the Power and USB indicator lights, see
indicator
The Setup Utility CD does not auto launch
1
Close all open software programs.
2
Restart your computer.
3
Reinsert the Setup Utility CD. If the setup utility screen appears, continue your setup
instructions.
If the setup utility screen does not appear, do the following:
a
From your desktop, double-click My Computer.
b
Double-click the CD-ROM drive icon.
State
Result:
On
The Print Server is powered on.
Off
USB cable connecting the print server to the printer is secure and
the printer is on.
On
USB cable connecting the print server to the printer or computer is
secure and recognized by the USB port.
Blinking
Indicates that a print job is active.
Off
Searching for network connection.
On
Connected to the network.
Blinking
flash file is downloading or flashing.
Blinking
Firmware Error. Power the print server off and back on again. If the
alternately
problem continues, call the Customer Support Center.
lights.
Troubleshooting
Understanding the print server
12
Advertisement
Table of Contents
