Table of Contents
Advertisement
Using the ABC Wireless Print Server Setup Wizard
1
Insert the ABC Setup Utility CD.
2
The welcome screen will open automatically. Click Next to access your computer's current
wireless settings.
3
Select the appropriate Network Name (SSID) from the list and click Next.
Troubleshooting tip:
If the Network Name you want to use is not in the list:
•
Select the I want to enter a different configuration radio button and Click Next.
If the correct Network Name is still not in the next list:
•
Make sure that your wireless network is broadcasting and try again.
If the correct Network Name still does not appear:
•
See
Entering alternate network
4
Select the appropriate security method and click Next. If no security was detected, proceed
to step 6.
5
Enter the appropriate security key(s) for your network and click Next.
6
Check each network attribute on the summary screen to make sure that the settings are
correct. If the settings are correct, click Next to apply these settings to your print server.
settings.
Configuring your wireless print server
6
Advertisement
Table of Contents
