Table of Contents
Advertisement
53
8.1.1 Testing
Ensure that the router functions correctly by carrying out the following
few steps.
To check out the system:
1.
Ensure that the NPU is inserted properly into the AC outlet. The
LEDs flash three times to indicate that the router is functioning
correctly.
2.
Turn on the PC. Wait for 3-5 minutes to allow the router to anchor to
the network.
3.
Check the LEDs to indicate an active internet connection.
4.
Open the web-browser and browse a few Internet pages to ensure that
the system downloads web sites.
AOL customers will need to use dial-up connections for the AOL
NOTE:
browser to perform correctly. The router supports only Netscape and
Internet Explorer browsers.
5.
Perform baseline testing according to the ISP's instructions and note
the results. It is very important to know the download speeds of the
router.
6.
Where there are problems with download or speed of connection,
check the installation first. If this does not solve the problem, then
contact the ISP.
Nokia RoofTop™ Wireless Router Installation Guide
Advertisement
Table of Contents
