Table of Contents
Advertisement
Nokia RoofTop™ Wireless Router Installation Guide
To assemble the antenna and router:
1.
Connect an RF cable to the directional antenna ensuring that the
connections are properly tight, but do not overtighten.
Connect the wireless router to the directional antenna with the
jumper cable
2.
Apply silicone lubricant on the threads of the RF cable adapter to
keep it from getting jammed. The recommended lubricant is: Dry
Lubricant PRF Tefsol.
•
Spray a small amount of lubricant on the threads of the RF cable
adapter. Make sure not to spray any lubricant inside the
connector.
•
Keep the RF cable adapter upside down for a few seconds until
the lubricant has dried up.
Installing the directional antenna
28
Advertisement
Table of Contents
