Table of Contents
Advertisement
Connecting to the computer
Attach NPU to computer through Ethernet cable
Use one crossover cable whenever a network hub is not being used.
NOTE:
Changing the Ethernet configuration from a LAN connection to a
direct PC connection requires changing from a standard Ethernet cable to
a crossover cable.
6.4.2 Phoneline networking connection
Connect a phone cable between the NPU's phoneline networking
connection and the RJ-11 phone jack on the wall. You can make this
connection in any room, the most likely being near the place where the
multiwire cable enters the home.
T o p h o n e l i n e
T o R o u t e r
Connect the NPU to the phone jack and multiwire cable
Nokia RoofTop™ Wireless Router Installation Guide
46
Advertisement
Table of Contents
