System Log; Ip Filtering; Mac Filtering - LG LSP-W1000 Owner's Manual

System Log

The Logs record various types of activity on
the Wireless Router. This data is useful for
troubleshooting, but enabling all logs will generate
a large amount of data and adversely affect
performance.
Enable Log: Click to enable log
function.
Apply Changes: After completing the
settings on this page,
click Save to save the
settings.
Refresh: Click to refresh the logs.
Clear: Click to delete the logs.

IP Filtering

Enable IP: Filtering Check to enable
Local IP Address: Enter the client IP
32
the IP fi ltering function.
address.
Protocol: Select the protocol (TCP,
UDP or Both) used to
the remote system or
service.
Description: You may key in a
description for the local
IP address
Current Filter Table: Shows the current fi lter
information.
Save: After completing the
settings on this page,
click Save to save the
settings.
Reset: Click Reset to restore to
default values.

MAC Filtering

Enable MAC Check to enable MAC fi ltering
Filtering: function.
MAC Enter the client MAC address.
Address:
Description: You may key in a description for
the MAC address.
Current Filter Shows the current fi lter
Table: information.
Save: After completing the settings on
this page, click Save to save the
settings.
Reset: Click Reset to restore to default
values.