Table of Contents
Advertisement
Client program
Client Program is the network program of the
Netstation.
The description pictures may differ from your OS
(Operating System) type. The pictures used in this
manual are based on Windows XP.
PC requirements
x OS (Operating System): Windows XP.
x CPU: Intel Pentium IV 1GHz or above.
x RAM: 256 MB or above.
x Graphics Card: AGP VGA with 64 MB Video RAM
or above.
x Browser: Internet Explorer 6.0.
x Etc.: HTML V4.0 or later, JavaScript V1.2 or later.
Recommended PC requirements
• OS: Windows XP
• CPU: Intel Pentium IV
• RAM: 512 MB
• Graphics Card: AGP VGA with 128 MB
Video RAM
Notes:
•
Your Browser must support JavaScript.
•
If you use the Windows Vista, Windows 2000 or
Windows 98, some function may not operate cor-
rectly.
•
If you can not install the client program, check the
security settings on your computer. It has limita-
tion as depending the security settings.
26
Logging in to the Web Viewer
when the computer and the
Netstation are directly connect-
ed
1. Connect a computer to the LAN port of the
Netstation using the network cable.
2. Turn on the computer and Netstation.
3. Set the network configuration of the computer as
shown below.
1) Open the [Local Area Connection Properties]
windows.
2) Select the [Internet Protocol [TCP/IP]] and
click [Properties].
3) Select the [Obtain an IP address automati-
cally] to use DHCP.
4) Click [OK] or [Close] repeatedly to save the
settings.
Hide quick links:
Advertisement
Table of Contents
