VGA connection
When using the VGA OUT jack, set the Video Output
mode select switch to VGA.
Connect the VGA OUT jacks on the rear of the
NetStation to the corresponding input jacks on the TV
or monitor using an VGA cable.
Note:
If the picture position is unbalanced on the VGA mon-
itor, refer to the owner's manual of the VGA monitor
to adjust the picture position of the VGA monitor.
Connecting the audio device
Connect the AUDIO OUT jacks on the unit to the
mono audio in jacks on your audio deivce.
12
Connecting the USB device
Connect the USB memory stick or external USB HDD
device for recording or playing. Then, you should use
the recommened USB devices. (see page ??)