Adjusting The Parquet/Carpet Brush; Operation; Adjusting The Suction Power; Accessories - Beko VCO 6325 FD User Manual

3

Operation

3.5 Adjusting the parquet/
carpet brush
Perform the following actions on the adjustment
latch (10) located on the parquet/carpet brush (9);
• Vacuum on firm ground and parquet; extend the
brush before vacuuming.
• Vacuum on carpets and rugs; retract the brush
before vacuuming.
3.6 Operation
1. Plug in the appliance after pulling the power
plug located at the back of the appliance.
WARNING: Stop pulling the
appliance cable when it comes to
A
the yellow mark located on it. After
the yellow mark the red mark comes.
Do not pull any more after reaching
the red mark.
2. Press on/off button (1) to switch on your
appliance.

3.7 Adjusting the suction power

You can increase the suction power of the
appliance by turning the suction power
adjustment knob located on the body of the
appliance clockwise according to the type of the
surface to be cleaned. To decrease the suction
power, turn the suction power adjustment knob
counter-clockwise.
8 / 57 EN

3.8 Accessories

Upholstery tool
Suitable for the cleaning of the
floorings, stair steps, inside of the
cars, sofas, armchairs etc.
Dust brush
Suitable for the cleaning of curtains,
and sensitive and fragile objects.
Crevice tool
Suitable for the cleaning of the
surfaces which are difficult to
clean, such as the areas remaining
under sofas and furniture.
A
WARNING: Do not make cleaning
by using the handle' s (13) end part.
3.9 Switching off the vacuum
cleaner and parking feature
1. Switch off the appliance with the on/off button
(1) and unplug it.
2. Insert the parking hook (7) of the parquet/
carpet brush into the parking groove located at
the rear section of the appliance.
Vacuum cleaner / User manual