Storing; Storing The Chain Saw; Cleaning; Cleaning The Chain Saw - Stihl MSE 141 C Instruction Manual

English
► Slide a chain scabbard over the guide bar so that it covers
the entire guide bar.
► When transporting the saw by hand, hold it by the front
handle with the guide bar pointing backwards, opposite
the direction in which you are walking. Never carry the
chain saw by the power cord or allow the cord to drag on
the ground.
► When transporting the saw in a vehicle, cover the guide
bar with a chain scabbard. Secure and position the chain
saw to prevent turnover, impact and damage.
Your saw comes standard with a chain scabbard that
matches the cutting attachment. If you use guide bars of
different lengths on the saw, the length of the chain
scabbard must be matched to the guide bar to reduce the
risk of injury. It should cover the full length of the guide bar.

18 Storing

18.1 Storing the Chain Saw

WARNING
Store the chain saw indoors in a dry, secure place that is
inaccessible to children and other unauthorized users,
@ 6.4. Improper storage can result in unauthorized use and
damage to the chain saw that can lead to fire and explosion,
and otherwise increase the risk of severe personal injury
and property damage, @ 6.4.
When storing the chain saw for three months or longer:
► Remove the saw chain and guide bar.
► Clean and spray the guide bar with protective oil.
► Clean the chain saw, @ 19.
► Fill up the chain oil tank, @ 11.4.2.
► Store the chain saw indoors in a dry and secure location,
out of the reach of children and other unauthorized
persons.
40

19 Cleaning

19.1 Cleaning the Chain Saw

WARNING
To reduce the risk of personal injury from unintended
activation, disconnect the chain saw from the power supply
and engage the chain brake before carrying out any cleaning
work, @ 9. Users of this chain saw should carry out only the
cleaning described in this manual.
To clean the chain saw:
► Clean the chain saw's plastic components with a slightly
dampened cloth. Do not use detergents or solvents. They
may damage the polymer components.
► Remove the sprocket cover and clean the area around the
chain sprocket with a slightly dampened cloth or resin
solvent, such as STIHL Resin Remover & Lubricant.
► Do not use a pressure washer to clean the chain saw or
otherwise spray it with water or other liquids.

19.2 Cleaning the Guide Bar and Saw Chain

WARNING
To reduce the risk of personal injury from unintended
activation, disconnect the chain saw from the power supply
and engage the chain brake before carrying out any cleaning
work, @ 9. Users of this chain saw should carry out only the
cleaning described in this manual.To help prevent injuries,
always wear heavy-duty work gloves when handling the saw
chain.
18 Storing
0458-729-8621-A