Attaching Router - Grizzly T28048 Owner's Manual

24. Attach dust collection bag and side pockets,
as shown in Figure 23. Match hook-and-loop
material on frame with that on dust-collection
bag. Loop straps around frame tubing and
match hook-and-loop material on straps and
dust-collection bag and side pockets.
Hook-and-
Loop Material
Hook-and-
Loop Strap
Figure 23. Attaching dust-collection bag and
side pockets.
25. Attach router to mounting plate. (For detailed
instructions, see Attaching Router.)
-20-
Hook-and-
Loop Strap

Attaching Router

Router attachment requires permanent
modification of your router table mounting
plate! Before attaching router, thoroughly
read procedure below and make sure you
can perform the required tasks.
The mounting plate included with the Model
T28048 is universal and designed to attach to the
bottom of your router in the same manner as the
base plate of the router. We recommend using the
base plate as a template for the hole pattern to be
drilled through the mounting plate.
IMPORTANT: When deciding how to orient the
router in relation to the router table, take into
account access to router controls, such as
variable speed dial, depth adjustments and other
locks or levers.
To attach router to mounting plate:
1.
DISCONNECT MACHINE FROM POWER!
2.
If necessary, remove fence assembly from
router table and table insert from mounting
plate (see Locking/Unlocking Table Inserts
on Page 30 for detailed instructions).
3.
Remove (4) M6-1 x 30 flat head cap screws
securing mounting plate to table, as shown in
Figure 24.
Mounting
Plate
Figure 24. Removing mounting plate from table.
Model T28048 (Mfd. Since 06/17)
x 4