Installation Instructions; Care And Maintenance - Duraflame DFI-8511-01 Manual

INSTALLATION INSTRUCTIONS

Tools Required for Assembly
Leg Assembly
1
Leg
Bracket
1. Align the 2 mounting tabs into
the bracket (Fig 1)

CARE AND MAINTENANCE

• Clean the trim using a soft cloth, slightly dampened with citrus oil based product and buff with a clean soft cloth.
• DO NOT use brass polish or household cleaners as these products will damage the metal trim. Citrus oil based
products can be obtained at supermarkets or hardware stores.
• WARNING: Electrical outlet wiring must comply with local building codes and other applicable regulations to
reduce the risk of fire, electrical shock and injury to persons.
• Warning: Disconnect power before attempting any maintenance or cleaning to reduce the risk of fire, electrical
shock or personal injury.
A485
Phillips Head Screwdriver
2
2. Slide the legs outward to lock in
place. The legs will snap into
place when correctly installed.
(Fig 2)
4
3
3. Fasten the legs to the base using the
included screws,1 per leg. If the
screw hole does not line up check
that the legs are properly snapped
into place. (Fig 3)
www.tsicustomerservice.com