Download Print this page
Chamberlain 940EV-P2 Getting Started

Chamberlain 940EV-P2 Getting Started

Wireless keyless entry
Hide thumbs Also See for 940EV-P2:

Advertisement

Available languages

Available languages

Quick Links

For use with Chamberlain garage door openers manufactured after January 1, 1993. The garage
door opener activates when the 4-digit Personal Identification Number (PIN) and ENTER button are
pressed on the Keyless Entry.
Install the battery and program the Keyless Entry prior to installation. Make sure the garage
door opener has a working light bulb because it is a programming indicator.
GETTING STARTED
Locate the Learn button on the garage door opener. NOTE: Your garage door opener may look
different.
PROGRAM
1
Press and hold the * and #
buttons until the lights on the
keypad stop blinking.
2
Enter a 4-digit personal
identification number (PIN) of
your choice, then press the
ENTER button.
3
Press and release the ENTER button on the Keyless Entry the
number of times that corresponds with your garage door
opener type:
GARAGE DOOR OPENER TYPE
Yellow Learn Button (315 and 390 MHz Security+ 2.0
®
Purple Learn Button (315 MHz Security+
)
Red/Orange Learn Button (390 MHz Security+
Green Learn Button (390 MHz Billion Code)
OR
OR
Learn
Learn
LED
LED
Green or
Red/Orange
Purple
4
Press and release the 0
button.
5
Press and release the Learn
button on the garage door
opener. The Learn LED will light.
Within 30 seconds...
6
Enter your 4-digit PIN, then press and release the ENTER
button until the garage door opener lights flash or two clicks
are heard.
# OF PRESSES
®
)
1
2
®
)
3
4
To prevent possible SERIOUS INJURY or DEATH from a moving gate or garage door:
• Install Keyless Entry Control within sight of garage door, out of reach of small children at a
minimum height of 5 feet (1.5 m) above floors, landings, steps or any other adjacent walking
surface, and away from ALL moving parts of door.
• ALWAYS keep remote controls out of reach of children. NEVER permit children to operate, or
play with remote controls.
• Activate gate or door ONLY when it can be seen clearly, is properly adjusted, and there are no
obstructions to door travel.
• ALWAYS keep gate or garage door in sight until completely closed. NEVER permit anyone to
cross path of moving gate or door.
Learn
LED
WARNING: This product can expose you to chemicals including lead, which are known
to the State of California to cause cancer or birth defects or other reproductive harm. For
Yellow
more information go to www.P65Warnings.ca.gov
WIRELESS KEYLESS ENTRY
MODELS 940EV, 940EV-P2, 940EVC AND 940EVC-P2
7
To test, enter your PIN, then press the ENTER button. The
garage door opener will activate.
To program the Keyless Entry to more than one garage door
opener, repeat the programming steps using a new PIN for each
additional garage door opener.
For additional programming instructions or additional help
please visit www.chamberlain.com/114A5071.pdf
www.chamberlain.com/CatalogResourcesV3/en-us/shared/files/tucmanuals/114A5044SP.pdf
Para Manual en Español ir a:

Advertisement

loading

Summary of Contents for Chamberlain 940EV-P2

  • Page 1 WIRELESS KEYLESS ENTRY MODELS 940EV, 940EV-P2, 940EVC AND 940EVC-P2 For use with Chamberlain garage door openers manufactured after January 1, 1993. The garage door opener activates when the 4-digit Personal Identification Number (PIN) and ENTER button are pressed on the Keyless Entry.
  • Page 2 ONE YEAR LIMITED WARRANTY 10 seconds. The keypad will blink twice when the one button close The Chamberlain Group, Inc. warrants to the first consumer feature is activated. purchaser of this product that it is free from defect in materials and/or workmanship for a period of 1 year from the date of purchase.
  • Page 3 ENTRÉE SANS CLÉ ET SANS FIL MODÈLES 940EV, 940EV-P2, 940EVC ET 940EVC-P2 À utiliser avec les ouvre-portes de garage Chamberlain fabriqués après le 1er janvier 1993. L’ouvre-porte de garage s’activera lorsque le numéro d’identification personnel (NIP) à 4 chiffres et le bouton «...
  • Page 4 GARANTIE LIMITÉE D’UN AN Appuyer et maintenir enfoncés les boutons 1 et 9 pendant 10 secondes. La société Chamberlain Group, Inc. garantit à l’acheteur initial Le clavier clignotera deux fois lorsque que le produit est exempt de tout défaut de matériaux ou de la fonction de fermeture à...

This manual is also suitable for:

940ev940evc940evc-p2