Starting & Stopping The Engine; Preparation - Honda NSS250A Owner's Manual

Hide thumbs Also See for NSS250A:
Table of Contents

Advertisement

Always follow the proper starting
procedure described below.
For your safety, avoid starting or operating
the engine in an enclosed area such as a
garage. Your scooter's exhaust contains
poisonous carbon monoxide gas which can
collect rapidly in an enclosed area and
cause illness or death.
Your scooter is equipped with a side stand
ignition cut-off system. If the side stand is
down––the engine cannot be started.
This scooter has an automatic fuel valve
and starting enrichment thermal valve;
there is no manual operation.
Starting & Stopping the Engine
Do not use the electric starter for more
than 5 seconds at a time. Release the start
button for approximately 10 seconds
before pressing it again.
Operate the starter button for slightly
longer than usual without opening the
throttle if the scooter has been left
standing for a long time or when the fuel
tank has just been refilled.

Preparation

Before starting, insert the key, turn the
ignition switch ON, and confirm the
following:
The engine stop switch is set to RUN.
Basic Operation & Riding
45

Advertisement

Table of Contents
loading

Table of Contents