Honda NSS250A Owner's Manual page 109

Engine Oil & Strainer Screen
5. Pour the drained oil into a suitable
container and dispose of it in an
approved manner (page
Improper disposal of drained f luids is
harmf ul to the environment.
6. Install the oil strainer screen, spring and
oil plug. Tighten the oil plug to
specified torque:
15 lbf·ft (20 N·m , 2.0 kgf·m)
7. Fill the crankcase with the
recommended oil (page
approximately:
1.2 US qt (1.1 )
100
Servicing Your Honda
156 ).
94 ),
8. Install the oil filler cap/dipstick securely.
9. Lock the rear wheel (page
10. Start the engine and let it idle for 3 5
minutes.
11. Stop the engine. Wait 2 3 minutes.
Check that the oil level is at the upper
level mark on the oil filler cap/dipstick.
12. Make sure there are no oil leaks.
If a torque wrench is not used for
installation, see your Honda dealer as
soon as possible to verify proper
assembly.
22 ).
−
−