Advertisement
Step 11
Carefully turn your unit over onto its front edges. Lay the BACK (F)
å
over your unit.
Make equal margins along both side and bottom edges of the
å
BACK (F). Push on opposite corners of your unit if needed to make
it "square".
Fasten the BACK (F) to your unit using the NAILS (1N).
å
NOTE: Be sure to tap NAILS into the holes that line up over the
å
upper SHELF/BOTTOM (D).
NOTE: Perforations have been provided for access through the
å
BACK. Carefully cut out the holes needed.
Edge without holes.
www.sauder.com/services
These holes must line up over
the SHELF/BOTTOM (D).
F
414675
1N
NAIL
(18 used in this step)
Page 15
Advertisement
