Taylor 1528 Instruction Manual page 11

How to read your WeatherGuide™
The base unit displays indoor conditions from its location.
The remote unit will transmit weather readings from its location back
to the base unit.
Alternately, the remote sensor's probe cord may be used. Plug the
probe cord into the rubber plug on the remote sensor.Allow the end
to hang where you wish to measure temperatures (out of a window,
aquariums, swimming pools, etc.)
Base unit – Indoor and Outdoor readings
Press Channel to see different
remote sensor readings
Channel icon indicates which
channel is displayed.
MOON PHASE
11
If more than one remote sensor is in use,
press the "CHANNEL" button on the back
of the base unit to toggle between sensor
displays.
A Channel icon on the base unit indicates
which remote sensor readings are dis-
played.
Remote unit – outdoor readings