Helion Avenge 10MT XLR Owner's Manual & Technical Information page 13

Technical Specification
Continuous current: ..60A
Burst current: ............300A
Resistance: ................0.0010 ohm
Motor type: .................Sensorless
Motor limit: ................3650kV
Battery: ......................2 – 9 cells NiMH or 2 – 3S LiPo
BEC: ............................6V/2A
Program port: ............Use cooling fan port
Dimensions (mm): .....48.5 x 38 x 32
Weight: .......................90g
WARNING: ALWAYS ALLOW YOUR MOTOR TO COOL BETWEEN RUNS. EXCESSIVE
ACCELERATION AND AGGRESSIVE DRIVING WILL CAUSE YOUR SYSTEM TO GET
HOT. EXERCISE GREAT CARE WHEN HANDLING YOUR VEHICLE AFTER RUNNING TO
AVOID GETTING BURNED.
Features of your ESC
• Waterproof and dustproof. The ESC can work underwater for a short time.
(Please disconnect the cooling fan when running the car in water. After
running, please clean and dry the ESC to avoid oxidation of the copper
connectors).
• Specially designed for RC cars and trucks, with excellent start-up,
acceleration and linearity features.
• Programmable Forward and Reverse throttle with brake.
• Proportional ABS brake function with 4 step brake force adjustment and
8 step drag brake force adjustment.
• 4 start modes from 'soft' to 'very aggressive'.
• Programmable Low voltage cut-off protection for LiPo or NiMH battery.
• Overheat protection.
• Throttle signal loss protection.
• Motor blocked protection.
• Easily programmed with the SET button on the ESC.
Your ESC has been pre-installed at the factory but before using your
vehicle each time it is good to double check the wiring for damage or loose
connections to ensure everything is in working order. Refer to the diagram
below to check the connections of your system. Some brushless motors, such
as the Helion 3300kV unit included with your vehicle, use only black wires,
this is okay. On sensorless brushless systems the motor will change operating
direction when any two of the motor wires (A, B or C) are swapped.
13