Giant RIDESENSE User Manual page 15

RIDESENSE alarm
function initiation failure
Connection to
RIDESENSE failure
Lack of speed or
peddling frequency
information
Please recycle disposed battery.
Mercury contents of this product comply with regulations 01890-AR4 of the EPA.
Note: Please remove the battery from your product if it will not be used for a long
1. Invalid alarm code
entry
2. Enter power saving
and sleep mode
1. Low battery power
2. Enter power saving
and sleep mode
3. Device pairing
failed
1. Poor magnet
sensing
2. Enter power saving
and sleep mode
magnet across the
RIDESENSE to wake it up.
1. Check whether the alarm
QRcode and bar code
contained in the accessory
label is scanned and entered
correctly.
2. Move the peddling
frequency magnet or speed
magnet across the
RIDESENSE to wake it up.
Make sure there is adequate
battery power left.
Move the peddling frequency
magnet or speed magnet across
the RIDESENSE to wake it up.
Pair the devices.
Make sure the magnet is
installed within the sensing
area.
Move the peddling frequency
magnet or speed magnet across
the RIDESENSE to wake it up.