Radio Operation - Clarion M505 Owners And Installation Manual

Radio Operation

Select Tuner As Playing
Source
[ /SRC]
Press the Source button to select the
TUNER mode.
World Tuner
This unit is initially set to USA frequency intervals
of 10 kHz for AM and 200 kHz for FM. When using
it outside the USA, the frequency reception range
can be switched to the intervals below.
U.S.A
standard
Frequency
10KHz
spacing
AM
Frequency
530-1710
range
KHz
Frequency
200KHz
spacing
FM
Frequency
87.9-107.9
range
MHz
Selecting The Radio Band
[BAND]
Press the button on the panel to select
one radio band.
[ ] Tuning Up / [
Tuning Down Buttons
[ ]
1. Press the
intervals step by step.
2. Press and hold the [
to seek to the next strongest station.
Recalling a Preset Station
Press one numeric button among 1 to 6 on the
front panel to select the corresponding stored
stations.
Europe Asia Australia
standard standard standard
9KHz 9KHz 9KHz
531-1620 531-1620
531-1602
KHz KHz
KHz
50KHz
50KHz 100KHz
87.5-108 87.5-108
87.5-108
MHz MHz
MHz
]
[ ]
/ button change
] / [ ] button
Presets Scan
Preset scan receives the stations stored in
preset memory in order. This functionis useful
when searching for a desired station in memory.
[ PS/AS]
1. Press the
2. When a desired station is tuned in, press the
[ PS/AS]
button again to continue receving
that station.
Manual Store
when one expected radio station has been
detected, press and hold number button 1-6 to
store it in the memory.
Local seeking
When LOCAL seeking is ON, only those radio
stations with strong radio signal could be received.
To select LOCAL function, press and hold the
[DISP]
button on the front panel, then press the
[ ] / [ ]
button repeatedly until LOCAL
or DX display on the LCD, rotate the
knob to select local or distant mode.
Area Set
This option allows you to select the appropriate
frequency spacing for your area.
1. Press and hold the [DISP] button.
2. Press the
[ /
"TUNER AREA"
[VOLUME]
3. Rotate the
"U.S.A", "Europe", "Asia","AUST (Australia)"
4. Press the
[MUTE]
button.
[VOLUME]
]
button to select
knob to select:
button to confirm.
M505
9