Table of Contents
Advertisement
8
Safety precautions
• An automatic connection acceptance
("connection without confirmation")
should only be used in exceptional cases.
• In general, only trustworthy devices
should be linked in order to minimise
security risks.
• You should restrict the "visibility" of your
phone if possible. This will make it much
more difficult for unknown devices to es-
tablish a connection with your phone.
To do this, in the Bluetooth menu, set the
Bluetooth visibility
option
Off
(page 103).
• The name of your phone is transmitted
in a Bluetooth connection. The factory
default is the "Bluetooth ID". The first
time Bluetooth is activated, or later in
the Bluetooth menu, you can change this
name
(Bluetooth
• If Bluetooth is not needed, this function
should be deactivated.
Before using Bluetooth accessories, or a
mobile phone inside a vehicle, check the
vehicle user guide for any limitations on the
use of these products.
On
from
name, page 103).
Important
Read this information before using your
wireless handheld phone.
As this mobile phone is equipped with a
fixed (non-retractable) antenna, some
paragraphs in the text below may not be
applicable.
Antenna care
to
Use only the supplied or an approved
replacement antenna. Unauthorized
antennas, modifications, or attachments
could damage the phone and may violate
FCC regulations.
Phone operation
Normal position
Hold the phone as you would any other
telephone with the antenna pointed up and
over your shoulder.
Tips on efficient operation
For your phone to operate most efficiently:
• Extend your antenna fully (if applicable).
• Do not touch the antenna unnecessarily
when the phone is in use. Contact with the
antenna affects call quality and may cause
the phone to operate at a higher power
level than otherwise needed.
Advertisement
Table of Contents
