Configure The S7-1200 Cpu And I/O Modules - Siemens SIMATIC S7-200 Manual

Program conversion process

2.2 Configure the S7-1200 CPU and I/O modules

Due to functional differences between the S7-200 and S7-1200, your user program may not
have been completely converted
An incomplete or improper conversion of your user program may cause unexpected
machine or process operation which could cause death, serious injury, or property damage.
You must review and check the converted program to ensure proper and safe operation in
your application.
2.2 Configure the S7-1200 CPU and I/O modules
Note
The converter tool does not configure the S7-1200 CPU and I/O modules.
1. Use the STEP 7 Basic Device configuration to either detect the configuration of the
2. S7-200 system Block CPU parameters and CPU status and control functions that are
programmed by SM memory addresses are not converted. You must set up the
corresponding S7-1200 CPU properties using STEP 7 Basic Device configuration
settings. CPU options that your S7-1200 program will use must be properly configured,
before your program can access or operate those CPU options. Some of the S7-1200
CPU configuration options are listed in the following table.
8
WARNING
connected S7-1200 system or specify the system components from the Hardware
catalog. All S7-200 programs are initially converted to the unspecified S7-1200 CPU type.
SIMATIC S7-200 to SIMATIC S7-1200 software conversion tool
Manual, 1/2010